Cemb-usa C68SE (B) User Manual download pdf (Page 6)

I 0201 GB - 6

3.5 - EXTRA SAFETY DEVICES

- Wheel always locked even when there is pressure failure during the balancing cycle.

- Rotary block wheel retainer which, in the event of accidental pressing of the pneumatic locking

pedal during the balancing cycle, avoids risk of the wheel slipping from the adapter.

- Always actuate the unlocking control pedal with the machine stationary in order to avoid stress

and abnormal wear on the adapter.

3.6 - ADAPTER MOUNTING

The balancing machine is supplied complete with cone adapter for fastening wheels with central bore.

Other optional adapters can be mounted; hardened shaft and tapers.

Fig. 4 Fig. 4

C68 Professional a) Unscrew rod B.

b) Unscrew end-piece A.

c) Fit the new adapter.

N.B. If there is no pressure, to remove the wheel, merely unscrew rod B to its full extent.

3.7 - GUARD MOUNTING AND ADJUSTMENT

a) Fasten the components to the base as illustrated in speciﬁ c exploded view.

b) The position of the wheel guard when closed can be adjusted with relative screw accessible at the back.

Correct position is the one which keeps the tube exactly horizontal with wheel guard closed.

c) Check that the microswitch is held down when the guard is closed.

d) Adjust the angular position of microswitch control.

3.8 - SPACER WD

When balancing very wide wheels (9”), there is

not enough space to turn the distance gauge.

To withdraw the wheel from the machine side,

ﬁ t spacer WD on the adapter body and secure

it with the standard issue nuts. When centring

the wheel with the cone on the inside, ﬁ t the

other cone as a spacer to obtain spring thrust.

SPACER WD

Spring

Spacer joint

Centring Joint

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

No comments

Cemb-usa C68SE (B) User Manual Page 6