Cemb-usa C68SE (B) User Manual download pdf (Page 15)

I 0201 GB- 15

5.3.4 - PRESETTING FOR LARGE-SCALE PRODUCTION

The machine can be used in production in the following two alternative ways:

1- Calibration with suitable wheel, as per the standard method. The machine is calibrated to the

dimensions of the wheel. On start-up or every change of production, the dimensions of the wheel in use

must be input (see Using the machine in Automatic Presetting)

2 - TCalibration on the wheel in use. This is useful when a rather long series of identical wheels is to

be balanced. Proceed as follows:

a) Switch off and restart the machine; the dimensions are preset by setup. Ignore these dimensions

and never modify them.

b) Perform a self calibration sequence with 3 spins (see Calibration of Wheel Balancer)

c) Use the machine as normal, bearing in mind that:

- on start-up, the machine is already calibrated for the wheel in use; no modiﬁ cation or presetting

at start-up is therefore required.

- when changing the wheel in use, it is essential to repeat calibration.

5.4 - USER CONTROL

The wheel balancer can be used simultaneously by 4 different users who, through a simple sequence, can

memorize their work condition and call it when needed. The users’ names can be memorized (ENABLING

OF ECCENTRICITY MEASUREMENT).

5.4.1 - USER MEMORIZATION

- Preset the dimensions correctly according to the procedures already described in sections AUTOMATIC

PRESETTING and TO CALL MEMORIZED MEASUREMENTS .

- Press

MENU'

; the “MENU” window appears on the monitor.

- Press

; a window appears with the list of available USERS. The current user is displayed in red.

- Press the number corresponding to the required USER. The system returns to the initial screen

automatically.

5.4.2 - TO CALL USER

- Perform a measuring spin with any dimensions.

- Press button

MENU'

; the “MENU” window appears on the screen.

- Press

: a window appears with the list of available USERS. The current user is displayed

in red.

- Press the number corresponding to the required USER. The system automatically returns to the initial

screen with recalculation of the unbalance values on the basis of the effective dimensions of the USER

called.

- Alternatively, proceed as described in section TO CALL MEMORIZED MEASUREMENTS.

N.B. - The dimensions memorized as USER are lost when the machine is switched off.

- The USER control is also valid for the ALU-S dimensions.

- The current USER is always displayed in the Measurements and Dimensions screens.

Save User

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comments to this Manuals

No comments

Cemb-usa C68SE (B) User Manual Page 15

Comments to this Manuals

Related products and manuals for For the car Cemb-usa C68SE (B)